Delphin ProfiMessage - 8.3 I;O modules: DIOT, IOIT and OTPT

ProfiMessage
Potentialisolation 2.5kV
Reversepolarityprotection 1kV
Digitaloutputs
Numberofoutputs
AAST:2
ADIT:1
Switchingvoltage max.50VDC
Switchingcurrent max.2.5ADC
Flybackdiode Integrated
Potentialisolation 2.5kV
8.3 I/O modules: DIOT, IOIT and OTPT

Digitalinputsforleveldetection
Numberofinputs
DIOT:12,including11forfrequencymeas-
urement/pulsecounting
IOIT:24
OTPT:1
Highlevel 3,5…90V/2mA(typ.2,7mAat5V)
Lowlevel 0…1.5V/0…1.5mA
Refreshrate 1kHz(1ms)
Minimumpulsewidththatcan
beevaluated
1ms
Maximumsignalfrequency 50Hz
Potentialisolation 2.5kV
Reversepolarityprotection 1kV
Digitalinputsforfrequencymeasurement/pulsecounting
Numberofinputs DIOT:11
Highlevel 3,5…90V/2mA(typ.2,7mAat5V)
Lowlevel 0…1.5V/0…1.5mA
Gatetime 1ms...6000ms,adjustableinincrementsof1ms
Frequencymeasurement 0…30kHz
Measurementerror 0…1kHz:±1Hz
225
Delphin Technology AG
Dezember 2015
ProfiMessage Manual