Delphin ProfiMessage - 4.7.26 Tolerance filter

ProfiMessage
MiB=1024x1024byte(Mebibyte,actualstoragecapacity);MB=1000x1000
byte(Megabyte).Aharddiskwith500MB(accordingtothemanufacturer)can
thereforeeffectivelyonlysave476MiB(500,000,000/(1024x1024)).
4.7.26 Tolerancefilter
Thetolerancefilterenablesyoutohidesmall(interference)signals.Valuesare
onlyoutput(relayed)ifthesettoleranceforthepreviouslyoutputvalueis
exceeded.Youcanreducethenumberofvalueswhicharedirectedintoamemory
group.
Youcanspecifythetoleranceintheelectricunitofthechannelorasapercentage
inrelationtothesignal’sscaling.Intheexample,valuesareonlyoutputifthey
deviatefromthepreviouslyoutputvaluebymorethan1mV.
150
Delphin Technology AG
Dezember 2015
ProfiMessage Manual