Delphin ProfiMessage - 2.2 PC connection

To Next Page

To Previous Page

ProfiMessage

Note for administrators

FortheconnectionbetweenPCandthedevice,youmustenableat

leastports80and1033.

2.2 PC connection

FortheconnectionbetweenPCandthedevice,youmustenableports80and

1033.IfyouuseWindowsfirewall,youmayseeawarningmessagewhenyouadd

theconnection,andauserwithadministratorrightswillneedtoauthorisethecon-

nection.

SeealsoXMLnetworkconfigurationtemplate,LANconnection

Preparing the device to PC connection

l ConnectyourPCandthedeviceusingtheEthernetcrossovercablesupplied.

AlternativelyyoucanconnectthedeviceandPCalsoviaanetworkhubor

switch.

Establish device connection

1. StarttheDataServiceConfiguratorprogram,tocreatetheconnectionand

maketheconfiguration.

TheDataServicestartsandtheConnectionstabisdisplayedontheleft-hand

sideintheDataServiceConfigurator.

2.

SelectmenuitemConnect→ FindDelphindeviceonLAN.Also,asshownin

theimage,youcanusetheAdddriver(connection)contextmenuinthe

DataServiceentryontheleftofthewindow.

3. Thedevicesearchtakesplaceandadialoguewiththefounddevice(s)isdis-

played.

Delphin Technology AG

Dezember 2015

ProfiMessage Manual