Delphin ProfiMessage - 4.6 Configuring I;O module channels; 4.6.1 I;O module

To Next Page

To Previous Page

ProfiMessage

HTTPisrequiredfortheWebinterface(forexamplefirmwareupdate),butcan

howeverbeswitchedoffwhennotrequired.

SSH,TelnetandFTParerequiredonlyifyouwishtoaccessadeviceviatheseser-

vices.

SFMP(SearchForMessageProtocol)isusedtofinddevices(Connections→ Find

DelphindeviceonLAN).

PiMP(PoNDinterchangeMessageProtocol)ispermanentlyrequiredbytheDataSer-

viceandcannotthereforebedeactivated.

XiMP(XMLinterchangeMessageProtocol)transfersdatainthesamewayasthe

DataService,exceptinXMLformat.

WiMP(WebinterchangeMessageProtocol)isrequiredforexampleforchannelrep-

resentation(Livechannelvalues)inyourInternetbrowser.

PTermisusedonlyindebugmodeforTelnettransfersandisthereforenotactiv-

atedbydefault.

More topics

4.6 Configuring I/O module channels

I/OmodulechannelsdenotethechannelsoftheI/Omodules.Theconfigurationfor

softwarechannels,interfacesanddevicememoryisdescribedinseparatesec-

tions.

ReferalsotoOverview,Settingsforalldialogues,Galvanicisolation,andTech-

nicalspecifications

4.6.1 I/Omodule

ThissectiondescribesconfigurationsattheI/Omodulelevelandhowtodeletea

moduleentry.

AnI/OmoduleappearsintheChannelstabasa symbol.TheI/Omodulesare

availableinthehardwareviewbelowthe"ExtBUS→ DCP"entry.Theuser-

definedviewlistsalltheI/Omodulesdirectlybelowthedevice()–providedthe

userhasnotalreadymovedthemodulesorchannels.

Double-clickanI/OmoduleorselectPropertiesfromthecontextmenutodisplay

theconfigurationdialogue.Usethedialoguetochangethemodulenameorsetthe

modulenumber(busaddress)intheMain settingstab.

Delphin Technology AG

Dezember 2015

ProfiMessage Manual