ProfiMessage
Intheaboveimage,aconversiontakesplacefrom2000(integervalue)to200
(°C),i.e.itreturnsadecimalpointdespitetransmissionofaninteger(wholenum-
ber).
Using the channel as output
IfyoucreateaCANbuschannelasanoutput,youcansenddatafromthedeviceto
otherCANbususers.
EnterthedataforthemessagetobesentinasimilarwaytoaCANbusinput.
Thereisnomask avaialblehereasforaninput,sothe(signal)sourcehastobe
entered.
EntereitheraconstantfortheSource(Manual value)orselectChannelandan
existingchannelinthedeviceforwhichavalueistobeoutput.SelectingApplic-
ationenablestheoutputvaluetobemanuallysetviatheDataServiceConfigurator
orautomaticallysetviaaProfiSignalapplication.Thesourcetypeisconvertedto
thetypegiveninData type(referalsotoScaling).
Inherit status(forChannelsettingsonly):Thestatusoftheinputchannelisused,
butnotoutputtotheCANbus.
4.8.3 COMconnection
FollowthesestepstorunadeviceviatheCOMinterface(serial,ModbusRTUor
PROFIBUS):
l SelecttheinterfacemodeoftheCOMconnection(thissection).
l SetthecommunicationparametersfortheselectedCOMconnection.
TousetheconnectionforPROFIBUS,thefollowingsettingsmustbeadopted:
l ConfigurethePROFIBUSprotocol.
l Createone(orseveral)channels:PROFIBUSchannel.
TousetheModbusRTUconnection,thefollowingsettingsmustbeadopted:
l ConfiguretheModbusRTUprotocol.
l CreateaModbusRTUmasteroraModbusRTUslave.
l Createone(orseveral)channels:Modbuschannel.
Alternatively,youcansetaprotocolyourself-theuser-definedprotocol:
l Configuretheuser-definedprotocol.
l Createone(orseveral)inputchannels.
l Createone(orseveral)outputchannels.
TousetheconnectionasaloggerforPROFIBUSdatatelegrams,thefollowingset-
tingsmustbeadopted:
l ConfigurethePROFIBUSloggerprotocol.
l Createone(orseveral)PROFIBUSloggerpairs.
l Createone(orseveral)inputchannels.
175
Delphin Technology AG
Dezember 2015
ProfiMessage Manual