Delphin ProfiMessage - 9.3.1.4 Configuration;settings for FFT;spectrum

ProfiMessage
Using a digital integrator limits analogue inputs
(depending on board version) to 1 ... 4. An overview is
available in the section on integrators.
Sensor compensation tab
Mode/Calibration points
Withactivesensorcompensation,compensationofzeropointandamplificationare
performed.Asimplevarianceanalysisisused.Inputisrequiredoftwopointsfrom
thelinearcharacteristiccurve.
9.3.1.4 Configuration/settingsforFFT/spectrum
Main settings tab
296
Delphin Technology AG
Dezember 2015
ProfiMessage Manual