Delphin ProfiMessage - 9.3 Configuration and operation; 9.3.1 Configuration with DataService Configurator

ProfiMessage
9.3 Configuration and operation
9.3.1 ConfigurationwithDataServiceConfigurator
TheprogramDataServiceConfiguratorgivesahierarchicaldisplayofasystem's
connectedcomponents.Thefollowingimageshows8"analogueinput"channels.
Analogueinput1hasadditionallyderivedchannels.
The‘AnalogueInputx'channeldeliverstimesignals(asblocksofmeasurement
data).Thevalueshownhereisthemaximumvalueofthetimesignal.
The‘AnalogueInputxFftSpectrum'channelproducesafrequencyspectrum(asa
blockofmeasurementdata).Thevalueshownherecorrespondstothespectrum's
highestamplitude.
ThefollowingimageshowsalltheotherchannelsfromtheAMDTI/Omodule:2
analogueoutputs,2counters,4digitalinputsand4digitaloutputs.Thetwocoun-
tersbelongtothefirsttwodigitalinputs.
281
Delphin Technology AG
Dezember 2015
ProfiMessage Manual