Delphin ProfiMessage - 9.2 Function; 9.2.1.1 Batch recording

ProfiMessage

Thesensorispoweredthroughaconstantcurrentdiode.Anexternalsourceof
24VDCisrequired.Thedynamicsignalundergoescapacitiveseparationfromthe
staticDCoperatingpointvoltage.ThecapacitorsandtheAMDTinputresistors
formasymmetricalhigh-passwithacut-offfrequencyof0.4Hz.
9.2 Function
9.2.1 Operatingmode
9.2.1.1 Batchrecording
BatchrecordingisthepresetoperatingmodefortheI/Omodule.Recording,ana-
lysisandmeasurementdatatransfertakesplaceinchronologicalsequence.The
DSPisthenonstandbyforthenexttriggerevent.
Signalsamplingcantakeplaceatupto20.48kHz,parallelacross8channels.
242
Delphin Technology AG
Dezember 2015
ProfiMessage Manual