Delphin ProfiMessage - 4.6.3.8 Advanced settings tab

ProfiMessage
Nernstfactor=ln10*molargasconstant*absolutetemperature/Faradaycon-
stant
molargasconstant=8.314472inJ/(mol*K),absolutetemperature=temperature
ofthereferencejunction+273.15inK,Faradayconstant=96.4851534inJ/(mV*-
mol)
Sensor type
SelectpH.
Sensor measuring range
Arangeof±625mVissufficientforthissensortype.
Temp. compensation
Temperaturecompensationisdeterminedbymeasuringthetemperatureatthe
measurementpointinthesolutiontobedetermined.Activatecompensationand
configurethechannelusingtheAdvanced settings tab.RefertoSettingsforalldia-
logues.
Scaling
The default scaling uses the standard measurement
methods and should not be altered.
4.6.3.8 Advancedsettingstab
TheExtended settingstabisidenticalforallanalogueinputsensorsbutnotevery
settingisaccessiblefromeverytypeofsensor.
89
Delphin Technology AG
Dezember 2015
ProfiMessage Manual