Delphin ProfiMessage - 4.7.22 Status generator

ProfiMessage
Selection Description
Defaultvalue Defaultvalueformonitoredchannel
Forcedvalue
Theforcedvalueisreplacementvalue,for
examplewhereasensorhasafaultyanalogue
channel
Scalerangeoverrun Scalingrangeexceeded
Scalerangeunder-
run
Scalingrangenotmet
Generalwarning
Anerroroccurredduringdatatransmission,for
exampleduringthePROFIBUStransfer
Triggerblockend Endofatriggerblock(datastorage)
Inputvalueoutside
thepermissible
range
Thesourcechannelvaluecannotbeprocessed,
thereisaparametererror
4.7.22 Statusgenerator
Thissoftwarechannel,e.g.fortestpurposes,cangenerateacertainstatus.You
cancheckwhetherthesystemreactsasrequired.
Youcantriggerthestatusimmediately(uponclosingthedialogue)orviaachan-
nel(Set status only with trigger).
ReferalsotoStatusfilter,Statusmonitoring.
Available alarm functions and their meaning
Selection Description
Alarm Nofunctioncurrentlyavailable
Wirebreak Wirebreakinmonitoredchannel
Configurationerror Errorinmonitoredchannelconfiguration
Invalidvalue Invalidvalueinmonitoredchannel
Measuringrange
overrun
ThemeasuredvalueisabovetheA/Dconverter
measuringrange
Measuringrange
underrun
ThemeasuredvalueisbelowtheA/Dconverter
measuringrange
144
Delphin Technology AG
Dezember 2015
ProfiMessage Manual