Delphin ProfiMessage - Page 172

ProfiMessage
Main settings tab
CAN ID
l Extended ID
SetwhethertheCANmessageuses11bitor29bitfortheidentifier.Theset-
tinginthisdialogueisavailableonlywhenExtended IDhasbeenselectedin
theCANconnectiondialogue.
l ID
IDEnterahexadecimalvalueforanIDeitherwith11bit(hexvalueof
between1and7FF)or29bit(between1and1FFFFFFF).Inputisrestricted
172
Delphin Technology AG
Dezember 2015
ProfiMessage Manual