Delphin ProfiMessage - Page 18

ProfiMessage
6. Enteranaddressthatiswithinthesamesegmentasthedeviceaddress(see
abovefigureforanexample).Alsosetthesubnetmask.
7. ClosethedialoguewithOK.
Thentryagaintomakeaconnectionwiththedevice.However,pleaseusethe
Connect→ AddDelphindevicemenutodothis,andenteryourdevicetype.
8. EntertheIPaddressofthedeviceinthedialogue,forexample
192.168.251.252.
9. Ifthedevice’sUsermanagementisenabled,enteryourlogindataunder
Username andPassword.
10. Fortimesignalsandspectra,youhavetheoptiontocompressacquiredmeas-
urementvalues.Compressionreducesmemoryrequirementssignificantly
andcomeswithlosses.
18
Delphin Technology AG
Dezember 2015
ProfiMessage Manual