Delphin ProfiMessage - Page 194

ProfiMessage
Data type settings
OutputisalwaysasanASCIIstring.However,youcansettheformatofthevalue
tobeoutputusingthedatatypesetting.
l Data type
Setsthedatatypeforthesignalthatistobeused.Thevalueforotherentries
dependsonthesettingshere.Forexample,theintegerdatatypehasno
decimalplaces,butcanbeoutputwithpost-decimalplaces,whicharethen
alwayszeroes.
Forthestringdatatype,enteritslength.
194
Delphin Technology AG
Dezember 2015
ProfiMessage Manual