Delphin ProfiMessage - Page 36

ProfiMessage
6. Carefullypullthemodulecircuitboardfromtheslotsintheboard.Becareful
nottobendanypins.

Installation
Followtheaboveproceduresinreverseorder,whiletakingthefollowinginto
account.
l ThesideoftheI/Omodulewithcomponentsmustpointtowardstheinnercir-
cuitboard.
l Checkthatallconnectorpinsfitintothesocketsoftheinnerboardandthat
theboardsareinparallelalignment.
36
Delphin Technology AG
Dezember 2015
ProfiMessage Manual