Delta DVP-20PM

4 Basic Instructions
Instruction
code
Function Applicable model
20PM
ANB
Connecting circuit blocks in series

Operand None
Explanation

The instruction ANB is used to perform the AND operation on the logical
operation result reserved previously and the contents of the present
accumulation register.
Example
Ladder diagram:
X0
X2
Y1
X1
X3
ANB
Block A Block B
Instruction code: Description:
LD X0 Loading the Form A
contact X0
ORI X2 Connecting the Form
B contact X2 in
parallel
LDI X1 Loading the Form B
contact X1
OR X3 Connecting the Form
A contact X3 in
parallel
ANB
Connecting the circuit
blocks in series
OUT Y1 Driving the coil Y1
DVP-20PM Application Manual
4-6