Delta DVP-20PM

9 Electronic Cam
9.2.1.5 Setting
a Starting Angle
Users can set M1752=ON to enable electronic cam activation at non-zero position, and write the start
position of Master in D1862, D1863.
50 100
D1863,D1862=0
Start position
Master position
Slave
position
Master position
50 100
Start position
D1863,D1862=25
25
Slave
position
Master position
50 100
Start position
D1863,D1862=50
Slave
position
DVP-20PM Application Manual
9-5