9 Electronic Cam
3. After Import is clicked, PMSoft will read Data_S.txt and draw a displacement chart in the CAM
Chart window, and a velocity chart and an acceleration chart will be drawn in accordance with the
contents of Data_S.txt.
4. After Import Speed Data is clicked, PMSoft will read Data_S.txt and draw a velocity chart in the
CAM Chart window, and a displacement chart and an acceleration chart will be drawn in
accordance with the contents of Data_S.txt
9.4.2 Using DTO/DFROM to Create Electronic Cam Data
DVP-20PM is designed with 3 virtual modules exclusively for electronic cam 0~electronic cam 2,
and
the numbers of each electronic cam chart are K100, K101 and K102. Through DTO/DFROM
instructions, users can set up or modify the electronic cam data in the user program. Electronic cam
Data created by PMSoft has been converted into floating point format because electronic cam data
DVP-20PM Application Manual
9-24
To Next Page
Loading...
