5 Applied Instructions and Basic Usage
DVP-20PM Application Manual
5-250
Timing diagram:
P2
5. Modules which are supported
The motion control functi
on block T_GcodeS V DVP20PM00M.
5.11.4 Readin
top supports D 0PM00D and
g an M-code
nction block 1. Motion co rol fu
The motion contr d.
The CLRMcode i
ins
nt
ol function block T_Mcode is used to read an M-code, and clear the M-code specifie
nput pin is used to clear the M-code specified.
2. Input pins/Output p
Input pin
Name Function
Data
type
Setting value Time when a value is valid
Enable
Enabling the
reading of an
M-code
WORD True/False -
CLRMcode
is a transition in the
CLRMcode input
pin’s signal from
BOOL True/False
The value of the CLRMcode input
pin is valid when the motion control
function block is executed.
An M-code is
low to high.
cleared when there