Delta DVP-20PM

5 Applied Instructions and Basic Usage
Example 3

The characteristic curve of DVP02DA-H2 is adjusted. The offset for channel 2 is
0 mA (K0
LSB
), and the gain for channel 2 is 10 mA (K1,000
LSB
).
M1002
TO K1 K1 H18 K1
TO K1 K33 H0 K1
X0
TO
K1 K22 K0 K1
TO
K1 K28 K1000 K1
1. H18 is written into CR#1 in the analog output module whose number is 1,
and channel 2 is set to mode 3 (current output: 0 mA~+20 mA).
2. H0 is written into CR#33. Channel 1~channel 2 can be tuned.
3. When X0 is turned from OFF to ON, the offset K0
LSB
is writtedn into CR#22,
and the gain K1,000
LSB
is written into CR#28.
Example 4

The characteristic curve of DVP02DA-H2 is adjusted. The offset for channel 2 is
2 mA (K400
LSB
), and the gain for channel 2 is 18 mA (K3,600
LSB
).
M1002
TO K1 K1 H10 K1
TO K1 K33 H0 K1
X0
TO
K1 K23 K400 K1
TO
K1 K29 K3600 K1
1. H10 is written into CR#1 in the analog output module whose number is 1,
and channel 2 is set to mode 2 (current output: +4 mA~+20 mA).
2. H0 is written into CR#33. Channel 1~channel 2 can be tuned.
3. When X0 is turned from OFF to ON, the offset K400
LSB
is writtedn into
CR#23, and the gain K K3,600
LSB
is written into CR#29.
DVP-20PM Application Manual
5-84