Delta DVP-20PM User Manual

5 Applied Instructions and Basic Usage
API
Applicable model
20PM
258
BRET
Returning to a busbar

Bit device Word device
X Y M S K H KnX KnY KnM KnS T C D V Z
 Note: There is no operand.
The instruction does not need to be driven by a contact.
16-bit instruction (1 step)
BRET
Continuity
instruction
－ －
32-bit instruction
－ － － －
 Flag: None
Explanation
 After the instruction BRET is executed, the instructions which should be driven
by a conditional contact will seem to be connected to a busbar, and will be
executed.
 The instruction BRET does not have to be driven by a contact.
Example

In the general program shown below, the instructions are executed only when
X0 is ON.
X0
MOV
K500
CJ
P10
D10

After the instruction BRET is added, the instructions which should be driven by
a contact will seem to be connected to a busbar, and will be executed.
MOV
K500
CJ
P10
D10
BRET
DVP-20PM Application Manual
5-142

Delta DVP-20PM Specifications

General

Brand	Delta
Model	DVP-20PM
Category	Controller
Language	English