10 Application of G-codes
Common mode
Step 1: Edit O100 main program. M-code (G-code) processing and COM port (COM1/COM2)
should be set up in O100 to communicate with PMGDL. Communication format: 115200, 8,
N, 1(RTU).
(A) Program for setting up COM1
(B) Program for setting up COM2
Step 2: Set up PEP settings in PMSoft to enable protection on O100 or other constant programs
and download the program to DVP20PM00M as below.
(A) Set up PEP settings on programs.
(B) Click Download Program.
(C) Download settings.
DVP-20PM Application Manual
10-3
To Next Page
Loading...
