Delta DVP-20PM

12 High-speed Comparison and High-speed Capture
4. The setting of the high-speed capture is read when M3 is ON.
5. When M4 is ON, K1 is moved to M1204~M1207. C204 is started when M5 is set to ON. (Mode
of counting: Pulse/Direction)
6. Use a manual pulse generator, and check whether C204 counts.
7. Use the manual pulse generator, and set X5 to ON.
8. The value captured is read when M3 is ON. When X5 is ON, the value in C204 is captured. The
value captured is 677.
When X5 is ON,
the value in C204
is captured.
DVP-20PM Application Manual
12-7