OPERATION
ry 2008 (101)
(1) Barcode Type
u to select the desired type of barcode. In this example, an
ns is available
If the user wishes to show the values contained in the barcodes, this box should be
active. The human readable interpretation will be printed under the actual barcode.
Human readable interpretation for the 2d composite component will be printed above
the code (one application identifier per line).
(3) Font type
If the “HUMAN READABLE” box is active, the user has the option of choosing the
font used to show the barcode’s human readable interpretation.
3
1
2
4
5
6
7
Use the drop down men
EAN128 has been selected. The type of barcode determines which optio
on the screen.
(2) Human Readable
27864 Issue 1Janua
To Next Page
Loading...