U60 Diagnostic Ultrasound System User Manual Operation
- 109 -
Figure 6-27 File Menu (with DICOM Function)
To send a DCM Image
1. Highlight the submenu DCM Image, and then press Set.
2. If the server is running normally, the current image will be sent to the server.
3. The system displays a prompt indicating the successful transmission.
To send a DCM file
1. Highlight the submenu DCM File, and then press Set.
2. The system displays the File Opening Dialog Box for selecting a DCM file to be transmitted.
3. If the server is running normally, the selected file will be sent to the server.
4. The system displays a prompt indicating the successful transmission.
To send a DCM package
1. Highlight the submenu DCM package, and then press Set.
2. The system displays the File Opening Dialog Box for selecting the drive: local disk or USB
disk.
3. If the server is running normally, all the DCM files of the selected drive will be sent to the
server.
4. The progress bar disappears after successful transmission.
To send Cine Images
1. Freeze the system.
2. Press File to enter the file menu.
3. Highlight the submenu Cine Images, and then press Set.
To Next Page
Loading...
