U60 Diagnostic Ultrasound System User Manual Transportation and Storage
- 189 -
Chapter 16 Transportation and Storage
16.1. Moving the System
The system is designed to be portable and easily transported. Power off the system and secure all
accessories before moving it to another location.
CAUTION
1 Switch off the ultrasound system. Unplug the power cord from the power source and
secure the power cable.
2 Put the probes in the probe holder, or remove them and place them in the protective
carrying cases.
3 Disconnect and secure the footswitch and the connecting cable.
4 Raise the brakes away from the front and back caster wheels of the mobile trolley
(optional).
5 Push the handle to roll the system forward and maneuver it to its new location and
lock the wheel caster brakes of the mobile trolley (optional).
6 Connect optional system accessories, such as the single-pedal footswitch.
7 Secure the system and complete the system setup, and then perform all the daily
checking before using it.
16.2. Storage
Do not place the device near the ground, walls or the roof.
Keep good indoor ventilation. Avoid strong and direct sunlight, and erosive gas.
16.3. Transportation
To prepare the system for shipment over long distances or rough terrain, repack the system in the
factory packing
To prepare the system for transport over distances: load the system into a vehicle using a lift gate.
To prevent lateral movement of the system, secure the system with cargo straps. To prevent
sudden jarring of the system during transport, provide anti-shock cushions beneath the system.
It is suitable for transportation by air, railway, highway and ship. Protect the system from
inversion, collision, and splashing with rain and snow.
To Next Page
Loading...
