U60 Diagnostic Ultrasound System User Manual Operation
- 116 -
6.13.6. Performing Puncture Function
To perform puncture:
1. The needle guide line is displayed on the image of the ultrasound system, and the numbers
on the right of the menu stand for the situation of puncture;
2. Align the needle guide line with the target;
3. Get the sample of the target;
4. Move the probe away from the patient carefully.
6.13.7. Center Line
The Center Line is a vertical dotted line displayed at the middle of the image field, representing
the middle of ultrasound beam. The Center Line helps to locate the position and depth of a target
disease focus .
To use Center Line:
1. Select Center Line from B-mode menu to activate Center Line.
2. A dotted center line is displayed vertically at the middle of the image field. The position and
direction of the center line cannot be changed.
3. Move the transducer to locate the target.
4. Use the image depth scale at the left side of the image area to obtain the depth of the target.
Note:
Center Line is not available on Endocavity transducer E612UB and phased array
transducer P5-1b.
To Next Page
Loading...
