U60 Diagnostic Ultrasound System User Manual Peri. Vascular Measurements & Calculations
- 170 -
Reference Section 6.5.4 Generic Measurements in D Mode.
3. The results are displayed in measurement result window.
4. To begin a new CCA measurement, repeat steps 1 through 3. You can measure a maximum of
one group of data.
13.1.2. ICA
To measure ICA:
1. In the PW-vascular measurement menu, select ICA.
2. Measure ICA by the method of D trace measurement.
Reference Section 6.5.4 Generic Measurements in D Mode.
3. The results are displayed in measurement result window.
4. To begin a new ICA measurement, repeat steps 1 through 3. You can measure a maximum of
one group of data.
13.1.3. ECA
To measure ECA:
1. In the PW-vascular measurement menu, select ECA.
2. Measure ECA by the method of D trace measurement.
Reference Section 6.5.4 Generic Measurements in D Mode.
3. The results are displayed in measurement result window.
4. To begin a new ECA measurement, repeat steps 1 through 3. You can measure a maximum of
one group of data.
13.1.4. Vert A
To measure Vert A:
1. In the PW-vascular measurement menu, select Vert A.
2. Measure Vert A, by the method of D trace measurement.
To Next Page
Loading...
