EDAN U60 - Apad; Hum; Cer

U60 Diagnostic Ultrasound System User Manual Obstetric Measurements and Calculations
- 125 -
Reference Section 6.5.1Generic Measurements in B Mode.
3. The results are displayed in measurement result window.
4. To begin a new TAD measurement, repeat steps 1 through 3. You can measure a maximum of
one group of data.
8.1.10. APAD
To measure APAD:
1. In the B-Obstetric measurement menu, roll the trackball to highlight the menu APAD, press
Set, and move the cursor to image and display “+”.
2. Measure APAD by the method of distance measurement.
Reference Section 6.5.1Generic Measurements in B Mode.
3. The results are displayed in measurement result window.
4. To begin a new APAD measurement, repeat steps 1 through 3. You can measure a maximum
of one group of data.
8.1.11. HUM
To measure HUM:
1. In the B-Obstetric measurement menu, roll the trackball to highlight the menu HUM, press
Set, and move the cursor to image and display “+”.
2. Measure HUM by the method of distance measurement.
Reference Section 6.5.1 Generic Measurements in B Mode.
3. The results are displayed in measurement result window.
4. To begin a new HUM measurement, repeat steps 1 through 3. You can measure a maximum
of one group of data.
8.1.12. CER
To measure CER:
1. In the B-Obstetric measurement menu, roll the trackball to highlight the menu CER, press Set,
and move the cursor to image and display “+”.