EDAN U60 - Fetal AO; Desc.ao; Placent a

U60 Diagnostic Ultrasound System User Manual Obstetric Measurements and Calculations
- 132 -
8.2.4. Fetal AO
To measure Fetal AO:
1. In the PW-Obstetric measurement menu, select Fetal AO.
2. Measure Fetal AO by the method of D trace measurement.
Reference Section 6.5.4 Generic Measurements in D Mode.
3. The results are displayed in measurement result window.
4. To begin a new Fetal AO measurement, repeat steps 1 through 3. You can measure a
maximum of one group of data.
8.2.5. Desc.AO
To measure Desc. AO:
1. In the PW-Obstetric measurement menu, select Desc. AO.
2. Measure Desc. AO by the method of D trace measurement.
Reference Section 6.5.4 Generic Measurements in D Mode.
3. The results are displayed in measurement result window.
4. To begin a new Desc. AO measurement, repeat steps 1 through 3. You can measure a
maximum of one group of data.
8.2.6. Placent A
To measure Placent A:
1. In the PW-Obstetric measurement menu, select Placent A.
2. Measure Placent A by the method of D trace measurement.
Reference Section 6.5.4 Generic Measurements in D Mode.
3. The results are displayed in measurement result window.
4. To begin a new Placent A measurement, repeat steps 1 through 3. You can measure a
maximum of one group of data.