U60 Diagnostic Ultrasound System User Manual Introduction
- 1 -
Chapter 1 Introduction
1.1. Overview
The U60 is a portable Diagnostic Ultrasound System, which applies advanced technologies such
as Phased Inversion Harmonic Compound Imaging (eHCI), Multi-Beam-Forming (mBeam),
Speckle Resistance Imaging (eSRI), and Spatial Compounding Imaging, etc. Various image
parameter adjustments, 15 inch LCD and diverse probes are configured to provide clear and
stable images.
Essential Performance:
Satisfying 2D imaging and basic functions of color ultrasonic system (such as color flow imaging
and spectral Doppler imaging). Please check details as below:
1. Compliant with essential performance requirements of EN60601-2-37.
2. 2D Imaging: It provides B mode and M mode imaging, and complies with requirements of
GB10152-2009.
3. Color flow imaging: It complies with the performance requirements of YY 0767-2009.
4. Spectral Doppler imaging: It complies with the performance requirements of YY 0767-2009.
1.2. Features
Multi-language displays
256 gray scale
Two probe sockets
Display modes:
B, B+B, 4B, B+M, M, B+PW, B+Color, B+Color+PW, B+PDI/DPDI, B+PDI/DPDI +PW.
B+CW, B+Color+CW, B+PDI/DPDI +CW
Generic Measurements and Calculations:
a). B/Color Mode: Distance, Area (Ellipse/Trace), Volume (2-Axis/3-Axis), Ratio, Angle,
and Histogram.
b). M Mode: Distance, Time, Slope and Heart Rate (two cycles).
c). D Mode:
Velocity, Heart Rate, Time, Acceleration, Resistance Index (RI), Pulsatility Index (PI)
and Auto Trace (auto trace is available only for PW mode)
To Next Page
Loading...
