EDAN U60 - Page 75

U60 Diagnostic Ultrasound System User Manual System Control
- 67 -
To use the print proxy function for graph/text report printing:
The print proxy function allows you to connect the ultrasound system with a PC, and then all the
graph/text report printing work can be done by the graph/text printers connected to the PC, which
provides you wide choices of printers for graph/text report printing.
1. Install the print proxy app "Print Proxy_Server" on a PC.
2. Connect the ultrasound system with the PC with a network cable.
3. Open the "Print Proxy_Server" app on the PC, which will display you an IP address and a port
number.
4. Press Set up and open the Connectivity page.
5. Input the IP address and port number displayed on the "Print Proxy_Server" app at the Print
Proxy field. Then make sure the local IP of the ultrasound system and the IP of PC are in the
same network segment.
6. Press Verify button to verify the connection between the ultrasound system and the PC.
7. Connect a graph/text printer you've got to the PC. Make sure that the PC has been installed
with the driver of the printer you connect.
8. Open the worksheet dialog box after exam, and press Print to print the report.
Note:
1. PC referred here could be a personal computer, a laptop or a mini PC module.
2. The operating system of the PC should be WindowsXP, Windows 7, Windows 8 or
Windows 10.