Epson Stylus Pro 9000 - Print Engine User Manual

EPSON Stylus Pro 9000
Adjustments 129
5.3.7 Parameter menu
Using this menu, you can initialize various maintenance records and update
(modify) various parameters (adjustment settings). Note that the parameters
on this menu can also be modified from the Adjustment menu. You do not need
to update the parameters from both menus.
INITIALIZE
Use this menu to reset (re-initialize) any or all of the items listed below.
 All
 Ink Lever C record
 Ink Lever B record
 Cover record
 Lever record
 PF Motor record
 CR Motor record
 Waste Ink record
 Wiper record
 C Head record
 B Head record
 Serial Number
 PF Resolution
 Capping Mechanism
UPDATE
The items you can update are listed below. When you turn the printer off, the
new values are stored in flash memory on the printer’s main board.
 Capping Position
 Head Rank (Printhead ID)
 Print Position Items (Bi-D and Gap adjustments)
 Paper Feed Distance
 Mechanical Parameters (adjustment settings)
 Ink Parameters
Lets you reset the Initial Ink Charge flag, causing the printer to perform the
initial ink charge the next time it’s turned on.
[SelecType]
[Paper Source]
Parameter: Init.
Parameter: Update
Update: Ink Parameter
Paper Feed +/-
Init Ink Charge Flag: set
Init Ink Charge Flag: reset
Update Parameter?
Updating Parameter
Enter

Epson Stylus Pro 9000 - Print Engine Specifications

General

Brand	Epson
Model	Stylus Pro 9000 - Print Engine
Category	Printer
Language	English