EPSON Stylus Pro 9000
Printer Basics 13
1.2.1.2 Operation at Power On
Pressing these buttons at power on puts the printer in one of the
following service-related modes. See
Service-Related Modes
on
page 17 for details.
1.2.2 SelecType Mode
The SelecType menus allows you to configure printer settings and
perform certain maintenance operations from the control panel. To
access these menus, press the SelecType button while the printer is not
printing. The printer enters the SelecType mode and cannot print.
1.2.2.1 Control Panel Operation in SelecType Mode
The control panel buttons have the following functions in this mode:
1.2.2.2 Main Menu Options in SelecType Mode
Table 1-4
lists the menus and where to find additional information.
Table 1-2. Operation at Power On
Button (Second function) Function
Power —
Pause (Reset) Maintenance Mode
See
Maintenance Mode
on page 17
SelecType
—
Cut/Eject (Enter)
Paper Feed
U
Paper Feed
D
Paper Source (Item)
Cleaning
Paper Source, Paper Feed
D
, Cut/Eject Maintenance Mode 2
See
Maintenance Mode 2
on page 17
Paper Source, Cut/Eject, Cleaning Firmware Update Mode
See
ROM Backup and Updating
on
page 105
Paper Feed
D
, Cut/Eject, Cleaning Self-Diagnostic Mode
See
Self-Diagnostics
on page 107
Table 1-3. Operation in SelecType Mode
Button (Second function) Function
Power
—
Pause (Reset)
SelecType Selects menu
Cut/Eject (Enter) Confirms and saves value
Paper Feed
U
Increases a value
Paper Feed
D
Decreases a value
Paper Source (Item) Selects item within a menu
Cleaning —
Table 1-4. SelecType Menus
Menu Description For more
information
Printer Setting Configure the printer
page 14
Test Print Print a nozzle check or status check
page 15
Printer Status Check ink levels and component life
page 15