Epson Stylus Pro 9000 - Print Engine - 7.2.7 Controller; 7.2.8 Cutter

EPSON Stylus Pro 9000
Appendix 159
 Ink volume
7.4 ± 0.17 oz. (220 ± 5 ml)
 Ink available for printing
6.4
± 0.47 oz. (190 ± 14 ml)
 Print capacity
A0 / approximately 28 pages at 720 dpi, 40% duty
A4 / approximately 6,4000 pages at 360 dpi, 5% duty
 Dimensions
Width 0.98 in. (25 mm)
Depth 10.24 in. (260 mm)
Height 4.13 in. (105 mm)
 Weight
Approximately 0.82 to 0.85 lb (370 to 385 g)
 Effective period
2 years from production if unopened; within 2 years after opening
the package, at 77 °F (25 °C)
 Environmental*
Operation –4 to 104 °F (–20 to 40 °C)
Storage –22 to 104 °F (–30 to 40 °C)
Transportation** –22 to 140 °F (–30 to 60 °C
)
7.2.7 Controller
 CPU
32-bit RISC-CPU (SH7043) 33 Mhz
 ROM
[Program]
CPU Internal = 128KB ROM
External = 1MB (Flash ROM/4Mbit x 2)
[Font] not-installed (Windows/Macintosh required)
 RAM
18MB (fixed)
(16MB: SIMM/2MB: IC18,19)
 Interface
[Standard]
IEEE1284 Bidirectional Parallel Interface
Macintosh Serial Interface
Type-B Card Slot (x1) for optional interface
7.2.8 Cutter
 Attributes
Made of steel so the blade can easily be chipped. This is a
consumable item that is replaced by the user.
NOTE: * Less than 1 month at 104 °F (40 °C)
** Less than 120 hours at 140 °F (60 °C)
CAUTION
 Do not refill or reuse cartridges; they are
consumable items.
 Do not use ink that beyond its expiration date; they
are consumable items.
 To use ink that has been frozen (below 5° F
[–15° C]), let it thaw at least 3 hours at room
temperature.