EPSON Stylus Pro 9000
Troubleshooting 39
3.1 Overview
To troubleshoot printer problems, turn to one of these sections:
If the LCD display shows an error message, see
Troubleshooting Using
LCD Error Messages
on page 39.
Since an LED or LCD error message may indicate a loose cable connector,
see also
Connector-Related Errors
on page 52.
If you notice problems with print quality such as missing dots or lines,
misaligned vertical lines, or banding (faint white lines), see
Print Quality
Troubleshooting
on page 49.
3.2 Troubleshooting Using LCD Error
Messages
The EPSON Stylus Pro 9000 performs self-diagnostic tests using the data
supplied by its sensors, and if an error is detected by one or more sensors, an
error message appears on the control panel display.
When the printer displays an error, look it up in
Table 3-1
or
Table 3-2
and
follow the link in the table to the appropriate troubleshooting section of this
chapter.
To Next Page
Loading...
Need help?
General