Esser 8000C - 4-Relay Module; 3-Relay Module; 3-Relay-Sas-Module; 4-Zone Module; BSL Module

Fire Alarm Computer 8000C / M
Page 147
24.7 4-relay module
Total power consumption : 10 mA
Contacts : 4 programmable NC contacts or NO contacts
(cannot be monitored)
Switching current : max. 1 A
Switching voltage : max. 30 V(DC)
Fuse : Multifuse 1,1 A (per relay)
24.8 3-relay module / 3-relay-SaS-module
3-relay module 3-relay common trouble module
Total power
consumption
: 5 mA 15 mA
Contacts : 3 monitored, programmable NC
contacts or NO contacts
2 monitored, programmable NC
contacts or NO contacts plus
trouble message relay
Switching current : 1 A 1 A
Switching voltage : max. 30 V DC max. 30 V DC
Fuse : 1 Multifuse 1,1 A (per Relay) 1 Multifuse 1,1 A (per Relay)
24.9 4-zone module
Total power consumption : 25 mA
Connection : 4 fire or diagnostic detector zones
Detectors : max. 32 detectors / zone
Supply : intern 12V DC
Current limitation : 100 mA / zone
CPU failure characteristics : Processor with CPU failure mode capability
24.10 BSL module
Supply voltage : 5V or 12V DC internal
Power consumption : max. 2,7 mA
Switch-contacts : Relay K1 , potential-free, freely programmable,
Switching power 30 V DC/1A
Monitored input : 3,3 k
Ω
(
±
10%)
⇒
normal mode
≤
680
Ω ⇒
trouble message
Technical Da
ta