Esser 8000C - Service Level

Page 40
Fire Alarm Computer 8000C / M
5 Service Level
The service level allows the operator to carry out operations or to switch off individual fire detectors
and primary loops in a functional fire alarm system. These functions can also be performed on
interconnected control panels integrated in the essernet
®
network, i.e. independently of the control
panel.
Fig. 42: Function key "Service“ in the status level
Fig. 43: Display in the service level
The following operations and switch-offs can be carried out in the service level on the fire alarm
control panel without entering an authorisation code:
♦ Primary loop functions (see Section 5.1.1)
♦ Sensor function (loop) (see Section 5.1.2)
♦ Sensor function (zone/detector) (see Section 5.1.3)
Enter the number of the desired function or select the menu point directly with the cursor keys and
press the Select function key.
The service level is protected from unauthorised access by means of an access code. Any
operation of the FACP may only be carried out by authorised and trained persons under
observance of the safety precautions and, if necessary, in cooperation with the emergency
services (e.g. fire department).
Service Level
Service
1 Primary loop function
2 Sensor function (loop)
3 Sensor function (zone / det.)
Escape Installer Select
Overview
Service time func.