Fire Alarm Computer 8000C / M
Page 25
4.2 Entering time/date
Escape
Function
Time fct. Time/Date
Time
Date
Delay on
: 10:4
: Tu. 02.06.99
: --:-- off: --:--
Fig. 15: Entering time/date
Year 2000 compliance
All functions of the Fire alarm control panel 8000 C/M work correctly in accordance with the
LPS2000 requirement. There is no action recommended on reaching the end date.
The end date of the implemented real time clock is the year 2080. After year 2080, leap
years will not be compensated and events will be displayed or printed with an incorrect date,
however time will remain accurate. Also any elements operated on specific dates or certain
days of the week will be actioned on the wrong day. The System 8000 C/M panel does not
incorporate any user codes that employ the calendar function to access or operate other
features.
Entering the time or the date is carried out under the menu point Time functions which is accessed
by pressing the corresponding function key.
The corresponding input field (hour, minute, day, etc.) is marked using the cursor keys and the
desired value is entered on the numeric keypad. When a date is entered DD.MM.YY, the day of the
week (Mo, Tu, We...) is automatically calculated.
Escape
⇒
Exits the menu point without storing the changes/inputs.
Function
⇒
The numeric values shown in the display are stored.
Entering times for the function Delay/Verify; see Section 4.6 !
☞
Approx. 20 seconds after the last operating action, the display switches back automatically
to the last menu point without storing the changes/inputs !
Entering time/date
To Next Page
Loading...
