Page 170
Fire Alarm Computer 8000C / M
25.1.6 Query of additional and info texts of other control panels (remote text)
With this function, the programmed additional and info text for controls, detector zones or
detectors of any FACP 8000C / M in the essernet
®
network can be queried and shown on the
display. This remote text query can also be carried out by the operator. If an event is imminent for
which additional or info text has been programmed, this is automatically displayed as remote text
Fig. 14: Satus display with the “ Rem. Text“ menu point
Fig. 15: Access to programmed additional and info text
☞
If additional or info text has not been programmed for this detector or control in the other
fire alarm control panel, an empty line is displayed by the
Rem.text
function.
25.1.7 Printer function
Under this menu point, the protocol printer connected to the fire alarm control panel (internal
printer and/or external serial printer) can be switched on or off. In addition, the contents of the
internal event memory of the control panel can be printed out on a local protocol printer.
☞
The activation of other control panel printers in the essernet
®
network is impossible.
ommissioning / Servicing
1. ACTIVATED Control : 015
1. ACTIVATED Control : 001
To Next Page
Loading...
