Esser 8000C - Controls; Switching on a Control Output

Page 32
Fire Alarm Computer 8000C / M
4.5 Controls
4.5.1 Switching on a control
With the switch-on, a previously switched off control (relay, open collector output) is switched back
on.
In case of an event, the switched-on output will be controlled in accordance with the programmed
control conditions.
Press Key
On
Relay
2
Fig. 29: Switching on Relay 2 (example)
Fig. 30: Display switching on Relay 2
Controls
Operation
On
in progress
Relay : 2