Fire Alarm Computer 8000C / M
Page 31
4.4.3 Status of a detector
With this function, the current status, e.g. Normal, Alarm and Trouble, of the corresponding
detector can be queried directly.
Individual status query within a detector zone is only possible if addressable ESSER series 9100
and 9200 detectors are used. Series 9000 standard fire detectors can not be queried individually.
Please note that the zone number has to be entered ahead of the detector number.
Press Key
Detector
Zone
2 1
Status query
2
Fig. 27: Status detector zone 2 /detector 12 (example)
Fig. 28: Display Status detector zone 2 / detector 12
Detectors
End
Operation Zone : 0002 Det : 0012
Status: normal
To Next Page
Loading...
