Page 8
Fire Alarm Computer 8000C / M
Master Box (MB)
Fire
Notify Fire Dept.
Releasing System
Fig. 5: Common display fire
The common display Fire is activated if at least one fire alarm has been detected. The originating
detector or detector zone will be shown on the alphanumeric display.
☞
If evacuation plans or guidelines exist for cases of fire alarm, these plans have to be
followed and the premises have to be evacuated, if necessary. Make sure to inform yourself
well in advance about existing escape routes and required measures in case of a fire.
Fire
Red LED is permanently on
⇒
Fire alarm !
At least one detector and / or one manual call point and / or a
loop is signalling a fire condition.
Fire Releasing System
Red LED is permanently on
⇒
The fire releasing control equipment is been activated.
Master box (MB)
Red LED is permanently on
⇒
The master box (MB) is activated and the intervention staff
(e.g. fire department) has been alarmed.
Notify fire department
Red LED is permanently on
⇒
The master box (MB) has malfunctioned or is switched off and
cannot be activated. Call the fire department immediately !
Function of the display and operating elements
To Next Page
Loading...
