ETC Express 48/96 - Go to a different cue

Express Two Scene Preset User Manual, v.3.1 89
Follow
[Follow] allows you to play a series of cues automatically. The [Follow]
time indicates how long the console waits after the cue starts before the
next cue runs. [Follow] plays back the next cue on the Cue List unless you
use [Link] to specify a different sequence.
Follow times may be expressed in minutes and seconds, or as fractions
of seconds, up to 99:59 minutes.
Follow these steps to record a cue with [Follow].
Keystrokes: Action:
1. Press [Stage] or [Blind]. Selects display mode
2. Press [Cue] [7]. Selects cue 7
Prompt reads:
Select cue number
To select cue type, press TYPE
3. Press [Follow]. Prompt reads:
Enter follow time (or press ENTER
to confirm default time (Press
CLEAR to cancel follow time)
4. Press [5] [Enter].
a
a. Press [Clear] in this step to remove an existing follow time.
Records cue 7 with a Follow time of
five seconds. After you start cue 7,
the next cue in the Cue List plays
automatically five seconds later