78 Chapter 6 Adding moving lights to the show
Fixture focus with Solo
Solo provides a convenient way to point or otherwise adjust a selected
moving light without the interference of others. Even better, you can
increment through fixtures one at a time, adjusting as you go, with a single
execution of the solo function.
There is no reason to use solo in Blind because the Fixture Box has a
similar incrementing feature. If you do use it in Blind, however, be aware
that solo leaves the levels for the selected fixture set and all the rest at
zero.
Example:
1. Patch fixtures 1-10.
2. Press [Stage].
3. Select fixtures 1-10 and
set levels.
4. Press [S8], Fixture, [1]
[S7], More Softkeys,
[S5], Solo.
Brightens fixture 1 and darkens all
other lights.
5. Adjust the fixture.
6. Press the + or – keys to
solo the next fixture.
Solo the next fixture.
7. Repeat steps 4 and 5
until finished.
Increment through all fixtures.
8. Press [S5], Solo. Return to the complete look on
stage.
To Next Page
Loading...
