232 Chapter 18 Macros
Playing macros
As a macro runs, the LED in the macro’s key flashes. Only one macro may
run at a time.
To run macros 1 through 5, press the appropriate macro key. For example,
to run macro 1, press [M1].
To play a macro recorded in [M1] - [M5], follow these steps:
To run any other macro, press [M*], the number of the macro, and [Enter].
For example, to run macro 10, press [M*] [1][0] [Enter].
To play a macro without its own key, follow these steps:
Canceling a macro
To cancel a running macro, press [M*].
Powerup macro
You may run a macro automatically each time you turn on your console,
such as to turn on lights or load a show. To enable the powerup macro
feature and select the macro, follow the procedure below.
Keystrokes: Action:
1. Press [Stage]. Selects Stage display mode
2. Press [M#]. Macro runs; prompt shows sequence of
activity as if you were entering the
keystrokes
Keystrokes: Action:
1. Press [M*] and enter the
macro number.
Prompt reads: Select macro number,
then press ENTER
2. Press [Enter]. Macro runs; prompt shows sequence of
activity as if you were entering the
keystrokes
Keystrokes: Action:
1. Press [Setup]. Selects the Setup menu
2. Press [6] [Enter]. Selects the Options Settings menu
3. Press [1][0] [Enter]. Selects the Powerup Macro option
Prompt reads: Select powerup macro
number (Enter 0 to disable)
4. Press [2][0] [Enter]. Selects macro 20 as your powerup
macro. Each time you turn on the
console, macro 20 runs
To Next Page
Loading...
