Express Two Scene Preset User Manual, v.3.1 255
Clear and reset options
Following is a list of all 14 options on the Clear Functions menu and an
explanation of the function of each.
1. Show - Erases all information pertaining to the show except patch
information and the system configuration.
2. Cues - Erases all recorded cues from the show.
3. Groups - Erases all recorded groups from the show.
4. Submasters - Erases all recorded submasters from the show.
5. Show and Patch - Erases all information pertaining to the show.
Unaffected are system settings, options settings and the I/O configu-
ration.See Reset System, next page, for clearing everything to
defaults.
6. Focus Points - Erases all recorded focus points from the show.
8. Macros - Erases all macro information from the show.
9. Reset Patch 1-to-1 - Resets to a one-to-one patch. Thus, channel 1 is
patched to dimmer 1, channel 2 is patched to dimmer 2, and so on.
This function is independent of your show and does not clear label,
level or profile settings. See Chapter 4 Patching channels, page 35, for
more information about patch.
10. Reset Profiles - Returns all dimmer profiles to their preset curves.
Profiles 1-9 return to their preset curves identified under Dimmer pro-
files, page 40. Profiles 10-32 all return to a linear curve.
11. Channel Attributes - Erases all channel attribute information, includ-
ing link lists, from the show.
12. Real Time Programs - Erases all Real Time Programs from the show.
13. Time Code Events - Erases all Time Code information from the show.
15. Moving Lights - Unpatches all fixtures and restores the defaults for
personalities, encoders and attributes.
To Next Page
Loading...
