Express Two Scene Preset User Manual, v.3.1 209
Deleting channels
Delete channels from a previously created effect step with the following
procedure.
Keystrokes: Actions:
1. Press [Blind] [Cue] [1].
Go to the Blind Effects display
Prompt reads:
Select cue number
To write effect, press STEP
2. Press [S1], Step, [5].
Specifies step 5
Select step number(s)
(To clear step(s), select step
number(s), then press CLEAR)
3. Press [Chan] [5] [And] [8].
Selects channels 5 and 8
Prompt reads:
Select channel number(s) and press
ADD CHANNELS to add to step(s),
or press AT to edit existing channel
level(s)
4. Press [Clear].
Deletes channels
5. Press [Record] [Enter].
Records your changes to the cue
To Next Page
Loading...
