Express Two Scene Preset User Manual, v.3.1 91
Linking a macro to a cue
[Link] allows you to automatically run a macro when a cue runs. If you link
macro 6 to cue 1, then macro 6 runs when you play cue 1. If you want the
macro to delay before running, one way is to start the macro with a Macro
Wait of the desired length.
48
You can also delay the macro by assigning a
follow time to the cue.
49
Follow these steps to link a macro to a cue:
48.
See Chapter 18 Macros for information about creating macros.
49.
See Recording cues with Link and Follow, page 88.
Keystrokes:
Action:
1. Press [Stage] or [Blind].
Selects display mode
2. [Cue] [1].
Selects cue 1
3. Press [Link].
Prompt reads:
To link to cue, select cue number
To link to macro, press ENTER
MACRO
4. Press [Enter Macro].
Prompt reads:
To link to macro, select macro
number
To link to cue, press CUE
5. Press [7] [Enter].
Records macro 7 linked to cue 1.
When you press [Go] to play cue 1,
macro 7 will run at the same time
To Next Page
Loading...
