Express Two Scene Preset User Manual, v.3.1 93
Labeling cues
If you have Expression Off-Line, you may assign labels to your cues.
50
Labels can consist of any combination of letters, numbers and symbols
and may be up to 16 characters long.
Follow these steps to label a cue:
50.
For information about Expression Off-Line and how to order it, see Expression Off-
Line, page 312.
Keystrokes: Action:
1. Press [Stage] or [Blind]. Selects display mode
2. Press [Cue] [1][2] [Label].
a
a. The Label key is not available on the Express console. You
may type keyboard equivalent “B” in Expression Off-Line as
a substitute for the Label key.
Selects Cue 12
Prompt reads:
Type cue label
(F6 = clear to end,
F7 = last cue label,
F8 = next cue label)
3. Use the alphanumeric
keyboard to type the
desired label. For example,
call cue 12 “Toad exits.”
Enters cue label
Corner reads: Label Toad exits
4. Press [Enter].
b
b. If the cue did not previously exist, press [Record] [Enter] in
step 4. This will create the cue and label, all in one step.
Records Cue 12 with label “Toad exits”
To Next Page
Loading...
