240 Chapter 19 Link lists
Inserting a link
Use the edit features softkey [S5], Insert Link, to insert an empty link
number ahead of the selected or specified link. All subsequent links will
be renumbered.
Note: The order in which links are recorded does not affect their operation.
However, your numbering may be useful to you in terms of logical
organization.
To insert a link, follow these steps:
Keystrokes:
Action:
1. Press [Setup] [1][1] [Enter].
Selects Channel Attributes display
2. Press [S7], Link List.
Selects Link List display
Prompt reads:
Select link number
3. Press [S5], Insert Link.
Prompt reads:
Select link number to insert, then
press ENTER.
To cancel, press CLEAR.
4. Press [1] [Enter].
Selects link 1 to insert. All links higher
than 1, up to the first gap in the Link
List (if any), are renumbered to make
room
Prompt reads:
Select X wheel channel number
(Precede with AND to add to
existing link, or EXCEPT to delete
from link)
5. Proceed with normal link
entry.
a
a.
See Setting up a link, page 239.
To Next Page
Loading...
